Syris Ghd

I cannot get a permit for the Harman P68 Pellet...

I cannot get a permit for the Harman P68 Pellet stove becuase it has an old ASMT 1509 reference needs to be ASTM 1509-17. Please help me!
View full review
Agustina Rbj

This review is from a real person who provided valid contact information and hasn't been caught misusing, spamming or abusing our website. Check our FAQ

Verified Reviewer
| map-marker Manchester, New Hampshire

Worried about my harmon stove causing fire

stars-rating-full stars-rating-full stars-rating-full stars-rating-full stars-rating-full
Harman Stoves - Worried about my harmon stove causing fire
Harman Stoves - Worried about my harmon stove causing fire - Image 2
Have had a problem from day one and the dealer we purchased from is very condescending and refuses to admit there is a problem and told me I cleaned the stove too thoroughly and not to do recommended cleaning stated in manuel. He also charged us for a service call. We hadn't had the stove for a whole season. Just did research and it points to stove not cleaned thoroughly!!
View full review

User's recommendation: If you want a Harmon pellet stove do not buy from heartland stove in Peterborough NH

Gary k Bml

This review is from a real person who provided valid contact information and hasn't been caught misusing, spamming or abusing our website. Check our FAQ

Verified Reviewer
| map-marker Meredith, New Hampshire

Extremely poor customer service and total disregard for safety.

stars-rating-full stars-rating-full stars-rating-full stars-rating-full stars-rating-full
Purchased a Harmon Oakleaf 6 years ago. The tiny clips that hold in place the side fire brick burn out and fail. The only place replacements can be bought is thru Harmon. This clip should not cost more than $10 and likely is made incorrectly. Any metal inside a firebox should be heat treated to prevent this failure. Haron is IMPOSSIBLE to communicate with. Your only option is to buy their criminally expensive clips for $77. If they cared about customer safety they would price them fairly or even provide them free until they can produce clips that do not deteriorate.
View full review

User's recommendation: Look elsewhere to stoves not owned under the umbrella company that owns Harmon and Vermont castings.

Gordon R Soq

This review is from a real person who provided valid contact information and hasn't been caught misusing, spamming or abusing our website. Check our FAQ

Verified Reviewer
| map-marker Moores Hill, Indiana

Stove cleaning

This stove has performed flawlessly since April 2019. The settings seem to be just for mental stimulation because they seem to change very little how the stove performs or pellet consumption , some change but not much. That doesnt make a difference in how the stove performs. My issue with the stove is at monthly cleaning time. It almost seems like the stove was either designed to be difficult to clean or no thought at all went into the cleaning process. Every inch of this stove is difficult to see & even more difficult to reach or access for cleaning. There is welding spatter all over the inside so using any type of scraper is mostly no help. The cleaning tool supplied with the stove is very cool looking & totally useless. I do a complete stove cleaning every month , inside & out & its amazing how much better the stove heats with this cleaning. It would have been nice had some thought gone into the cleaning process as well as the performance. Maybe in future stoves , Im stuck cleaning this one.
View full review

User's recommendation: I’m happy with the stove performance as I’m sure future customers will be. For me , I’ll just have to tough out the cleaning , maybe newer stoves will see some modifications to make cleaning much less difficult.

Anastacia Tlt

This review is from a real person who provided valid contact information and hasn't been caught misusing, spamming or abusing our website. Check our FAQ

Verified Reviewer
| map-marker East Stroudsburg, Pennsylvania

Information

stars-rating-full stars-rating-full stars-rating-full stars-rating-full stars-rating-full
Harman Stoves - Information
I was trying to show you what a difference it makes painting the word Harman. I am very surprised you havent thought of this free advertisement. Too bad I cant send a picture. Your website is not customer oriented.
View full review
Zsolt B Lqf

This review is from a real person who provided valid contact information and hasn't been caught misusing, spamming or abusing our website. Check our FAQ

Verified Reviewer

Problem with baked door gasket

stars-rating-full stars-rating-full stars-rating-full stars-rating-full stars-rating-full
After running my brand new absolute 43 for a day, the door gasket got stuck so badly to the stove, the i had a very difficult time opening the door. When it finally opened, left a mark on the stove, and the gasket hardened, and loosened up. Very disappointed, that after $5700 spending on this stove I already have to worry about this.
View full review

Preferred solution: I like to get minimum a new gasket installed on my stove

Michael G Ixc

This review is from a real person who provided valid contact information and hasn't been caught misusing, spamming or abusing our website. Check our FAQ

Verified Reviewer

Auger making a banging noise

Called to ask questions to customers service. To do DIY fix, I live in the mountains closest dealer is hour and a half away won't answer questions over phone said has to come to home to troubleshoot and has a trip charge plus mimum charge. Exhaust fan motor sounds like a train over tracks and fan blades behind ash bucket has set screw that won't budge afraid if snaps won't be able to replace fan motor
View full review

Preferred solution: Help to diy replacement

Juliet Kmy
map-marker Onaway, Michigan

Questions on my p43 pellet stove

Very nice/gracious gentleman returned my call and answered my questions in layman's terms. Did what he said and now my p43 is working properly! Thank you! If you could convey this to him it would be appreciated! Thanks again!
View full review

User's recommendation: Get a Harman stove

Anonymous
map-marker Plymouth, Massachusetts

This stove is awful

stars-rating-full stars-rating-full stars-rating-full stars-rating-full stars-rating-full
After spending almost $15K for purchase and install I have had nothing but issues. I have cared for the stove as per instruction. The stove is malfunctioning constantly - the install company is out at my house multiple times a month. Total waste of my funds and they will not let me return
View full review

User's recommendation: Don’t use!!

Kalli C

This review is from a real person who provided valid contact information and hasn't been caught misusing, spamming or abusing our website. Check our FAQ

Verified Reviewer

Biggest POS, fought with this stove for 5 yrs. Still no help to be found and customer service is non existent

stars-rating-full stars-rating-full stars-rating-full stars-rating-full stars-rating-full
Bought the stove, wouldnt burn said our chimney was the cause, had a new chimney installed, then our wood wasn't right, had good 2 ye seasoned wood, still wouldn't burn, have tried for 5 yrs to get resolve, customer service is nonexistent. Burnt wood for 50 yrs never had this kind of trouble with ANY other brand. Do not buydo not purchase
View full review
Loss:
$4500
Pros:
  • Looks nice top loads
Cons:
  • Too many to list it says

Preferred solution: Replacement

Anonymous
map-marker Manchester, New Hampshire

Setting the schedule

No complaining.. very happy with our Allure50.. I couldnt figure it out to schedule each day to come on early in the morning
View full review

User's recommendation: Awesome pellet stove

Chris T Zru

This review is written by an individual who has purchased the reviewed product/service and/or confirms being a paying customer of this company. Check our FAQ

Verified Buyer
| map-marker Ovid, Michigan

No customer service

stars-rating-full stars-rating-full stars-rating-full stars-rating-full stars-rating-full
Harman Stoves - No customer service
Harman Stoves - No customer service - Image 2
No customer service, no resolution to the non working stove! Stove 4 months old under warranty and still trying to get help! I will be happy to change this rebid I can get help!
View full review

Preferred solution: Full refund

User's recommendation: Buy a different brand!

Anonymous
map-marker Sussex, New Jersey

Fuse keeps blowing

When I open the door to clean the burn pot, the fuse blows snd the stove shuts off. I replaced the fuse, plugged the stove back in and the fuse blows again. Mod, 52i
View full review
Peter T Tjd
map-marker Coventry, Connecticut

Combustion Blower Very Noisy

I have had the Harman Accentra free standing pellet stove for over 14 years. It has been very reliable and worked well. After 12 years, the combustion blower motor started squealing and was replaced. The replacement motor had been redesigned but worked o.k. for a month or so. It became so noisy, it had to be replaced again. This one also was quiet for a while and then became very noisy also. Makes a rattling/growling type noise. Very annoying in your living room. Dealer said Harmon is aware of the problem but has made no indication that they are going to do anything about it. Dealer has ordered another one, but they are on back-order. If this doesn't resolve the noise, I am afraid I must go to a different type of heat source. I am very disappointed because I always thought Harmon was the top-of-the-line stove and always promoted them.
View full review

Preferred solution: Let the company propose a solution

User's recommendation: If Harmon can correct this issue, I will fully promote them again.

1 comment
Ayrianna Wgn

I also am having issues with my 2022 52i insert. Combustion motor is causing a vibration which shakes the interior fluted heating plates at certain rpm’s

Mike C Iby
map-marker Brattleboro, Vermont

Combustion motor replaced again

Just today,3rd combustion motor replaced. Cant afford to keep doing this. Its not like this stove runs 24/7,we use the stove for 3-4 months a year.can not use the stove at night when going to bed,you cant fall asleep with all the noise combustion motor makes.we were going to purchase the newest stove with the digital top but not going to pour $5000 for stove thats noisey. Just shelled out $288 to replace motor.dont mind paying the labor but to eat the cost of a motor every 2 years,or in reality 12 months(dont use it spring,summer or fall really not acceptable. Mike Coakley 603 502 ****
View full review
Loss:
$288

Preferred solution: Full refund

Snjezana D
map-marker Whitehorse, Yukon

Pellet stove help

My pellet stove stopped working in end of the May 2021, contacted company that I purchased stove from. Waited 2 months to get first parts in, stove was not fixed properly. The company ordered new parts after waiting approximately one month, they replaced parts that did not fix the stove. Six months latter, the stove is still not working properly.
View full review

Preferred solution: Get my pellet stove in working order same as before it stopped working

Brands Related to Harman Stoves

Why Trust Reviews on PissedConsumer?

  • Professional auto and live moderation
  • 100% user-generated content
  • Equal opportunity and protection
  • Zero tolerance for fake reviews
  • Verified content
  • PissedConsumer is on the Inc. 5000 list

For more information read Blog article